Industries
Five sectors, one stock book.
The same product families serve very different jobs. Here’s where ours typically end up.
Industry
Electrical
LV and MV jointing, terminations and bus bar work.
Specifying engineers and contractors building, repairing and maintaining LV and MV networks. Stress-control tubes, anti-tracking termination tubes, semi-conductive tube, MV breakouts, rain sheds, bus bar tubes and tapes — and the mastics and self-amalgamating tapes that go with them.
- Stress-control tube up to 36 kV
- MV breakout boots and rain sheds
- Anti-tracking bus bar tube and tape
- PVC and self-amalgamating tape
Industry
Automotive
Wiring harness, sensors, in-cabin and engine-bay assemblies.
Thinwall and adhesive-lined heat shrink for harness work, environmental sealing on connectors, abrasion protection on looms. We stock a thin-wall range to UL VW-1 and MIL spec for dash and engine-bay use.
- Thin-wall polyolefin in standard ratios
- Adhesive-lined dual-wall for connector sealing
- Yellow/Green earth ident tube
- Mini-box dispensers for line-side use
Industry
Telecoms
Cable repair, re-jacketing and pressurised systems.
Wrap-around sleeves with stainless-steel rail or rail-less options for jacket repair on in-service cables, and glass-reinforced sleeves for pressurised telecom applications. Mini-boxes for field engineers and breakout boots for distribution work.
- SS-railed wrap-around sleeves
- Rail-less sleeves for cosmetic jacket repair
- Pressurised joint kits
- LV breakout boots
Industry
Rail
Rolling stock and lineside cabling.
Heat-shrink products for rolling-stock harnesses and lineside power and signalling cabling. We can supply to spec — fire performance, low smoke, low halogen — when the job calls for it. Tell us the standard and we will source.
- Low-smoke / low-halogen tubing on request
- LV moulded parts
- Identification tube and tape
- Pre-kitted joint packs
Industry
Marine
Sealed terminations and protected cable runs in salt environments.
Adhesive-lined heat shrink and high-shrink-ratio end caps for sealing cable terminations on board. Anode caps for cathodic protection on hull penetrations and seawater systems.
- Adhesive-lined dual-wall tubing
- High-shrink-ratio end caps with valves
- Anode caps for cathodic protection
- Self-amalgamating sealing tapes
Talk to a specifier
Working in another sector?
The heat-shrink range crosses into oil and gas, defence, broadcast and more — get in touch and we’ll quote against your spec.